BodyMedia FIT Operations Instructions download pdf (Page 5)

BodyMedia FIT Armband and Display Manual BodyMedia FIT Armband and Display Manual

Removing the Armband strap from the Armband

You will need to remove the Armband from its strap to upload data or to clean the

Armband.

1. With the Armband logo facing upward, apply

continuous downward pressure to the right side

of the Armband until it separates from the

Armband strap.

2. To reattach to the strap, locate the USB port on the Armband, then align port

with the indentations on the left side of the strap. Apply upward pressure to the

right side of the Armband until it snaps into place.

Armband Status Indicators

Power

When the Armband makes contact with your body, it will automatically power on.

This may take up to 10 minutes. Activation is indicated by a series of audio tones.

Please note that there is no power button on the Armband.

Battery

Before ﬁrst use, fully charge your Armband battery by removing the Armband strap

and connecting the Armband to your computer with the included USB cable. Charg-

ing will take approximately three hours. The battery light will ﬂash green when the

Armband is fully charged. Model MF will function for 5-7 days before recharging is

needed.

To check the battery power level, remove the Armband from your arm and press the

Armband’s Status Button. The battery light will indicate the power level as:

• Green (solid) = More than 24 hours of battery life remain.

• Amber (ﬂashing) = Less than 24 hours of battery life remain.

• Red (ﬂashing) = Battery needs to be charged immediately and the

Armband cannot collect data. Charge the battery before continuing use.

Memory

The Model MF Armband will collect data for about 14 days under steady use. To

check the memory status, remove the Armband and press the Armband’s Status

Button. The memory light will indicate memory level as:

• Green (solid) = More than 24 hours of memory life remain.

• Amber (ﬂashing) = Less than 24 hours of memory life remain.

• Red (ﬂashing) = Memory is full and the Armband cannot collect

additional data. Connect the Armband to your computer via the USB

cable and upload data before continuing use.

Status Button

Monitor

Status Lights

Armband strap

1 2 3 4 5 6 7 8 9 10 ... 16 17

No comments

BodyMedia FIT Operations Instructions Page 5